Product details / PRODUCT DETAIL

Your current position:HOME > Product series

hammer crusher

  Application: It can be used to crush medium hardness or crisp materials in mine, cement, coal, metallurgy, building material, road industries. The discharging size can be adjusted according to the specific requirement.

  Suitable material: It can crush medium hardness and weak corrosive material with compression strength less than 100Mpa. The water content should be less than 15%. The material can be coal, salt, plaster, brick, limestone etc.

consultation Immediate order

PRODUCT FEATURES

 Features:

  1. Easy structure, high broke ratio and productivity.

  2. It has dry and wet crushing modes.

  3. It can be used in crush production line, sand production line and also can replace the cone crusher in sand   choosing production line.

WORKING PRINCIPLE

 Working principles: the motor drives the rotor to rotate at high speed in the crushing chamber. The materials fed from the upper part of the crusher, are impacted, sheared and crushed by the high speed rotating hammer. At the lower part, the screening plates are equipped, which allow the materials less then the sieve discharge; and the materials over the sieve are left on the screening plate to be continuously impacted and crushed by the hammer, finally it’s discharged.

TEHNICAL PARAMETERS

Specification model

Speed

Feed particle size

Grain size

Yield

Weight

Power

Dimensions

PC-400×300 

1450 

≤100 

10 

3-10 

0.8 

11 

812×9827×85 

PC-500×350 

1250 

≤100 

15 

5-15 

1.2 

18.5 

1200×1114×1114 

PC-600×400 

1000 

≤220 

15 

5-25 

1.5 

22 

1055×1022×1122 

PC-800×600 

980 

≤350 

15 

10-50 

3.1 

55 

1360×1330×1020 

PC-800×800 

980 

≤350 

15 

10-60 

3.5 

75 

1440×1740×1101 

APPLICATION CASE

OTHER PRODUCTS


  • special crusher for whole piece residual anode carbon

  • roll crusher

  • Hydraulic cune crusher

  • impact crusher

  • PFL Series Vertical Complex Crusher

ONLINE ORDERING

You can fill in the following form, the contact information and product needs to be submitted to us, we will contact you as soon as possible, thank you! In order to be able to get in touch with you in time, please be sure to fill in your contact information and requirement.

Submit orders    rewrite

HENAN LUOYANG

Luoyang Yuhang Heavy Industries Co., Ltd.
Headquarters Address: Advanced Manufacturing Cluster Area, Luoyang, china.
Tel: 0379-62112728 
0379-64237398
Post code: 471003
E-mail: mail@lyyhzg.com
Chinese official l website: Http://www.lyyhzg.com
English official website: www.yuhang-china.com